32 Cavity PET Preform Moulds for the preform with 30/25 neck, equipped with balanced hot runner system with valve gate.We provide the 72 cavity PET preform molds for Indian preform molding system, Netstal PET line.The main components of molds (Die Core, Die Cavity And Screw Neck) are made by injection process, which are made of special mold steel ( Germany steel 1.2316) after preheating treatment in the original factory in Germany. In this way, the mold with long life service and high quality can be used for 3 million shots without any maintenance, meanwhile, the wall thickness between max. Parts and min. The molds equipped with imported components including high-qualities lubricating copper plate, Indian heaters of Elemec/Marathons standard standard PID temperature controller. Moreover, turning center processes make sure that every parts can match well; Proper distribution of cooling water way improve productivity effect and molding cycle only takes 15 seconds(need proper water chiller, bottle design and injection machine).
Cavity: 32, 64
Weight of preforms: 20 g
Cycle Time: 20 Sec
Capacity:2-5 moulds per minute
There are 32 Cavities in the mould Electric control system with simulating stretch testing improve yield rate Adopt world advanced dipole taper localisation technique, each cavity self-clamp independently, ensure mould concentricity.
The material of mould die core and die cavity are made of German special mould steel International standard screw neck, imported nitrided steel with high hardness is of long usage .
Advanced hot runner design and even heating temperature that makes sure the high quality of plastic products